Rockwell Automation Allen-Bradley SynchLink 1756-DM Series Design Manual page 69

1
Installing a SynchLink Fiber Optic
Cable System
This chapter describes how to install a SynchLink fiber optic
cable system.
For more information about:
Using Pre-terminated Fiber Cable
Using Cable System Components
Mounting and Removing Your Fiber Blocks
When installing a SynchLink fiber optic cable
ATTENTION
system, remember the following:
!
· Never look into a transmitter's output or
the end of a cable with an active
transmitter connected.
· Do not look directly into the fiber ports.
Light levels may cause damage to your
eyesight.
· Never use a microscope to view an active
cable system. The concentration of light
from the microscope could cause
permanent damage to your eye.
SynchLink products are Class I LED
products.
Publication 1756-TD008A-EN-P - August 2002
7
Chapter
See page:
7-2
7-2
7-5