Multiple Unit Power Linking; Fuse Replacement; Trouble Shooting; Cleaning - ADJ VIZI CMY300 User Instructions

MULTIPLE UNIT POWER LINKING

With this feature you can connect the fixtures to one another using the powerCON input and output
sockets. The maximum that can be connected is 3 fixtures @ 120V and 7 fixtures @ 230V. After the
maximum connected fixtures you will need to use a new power outlet.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE VIZI CMY300 AS THE
POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!

FUSE REPLACEMENT

Unplug the unit from any power source it may be connected to. Once the power has be disconnected, use a
phillips head screw driver to unscrew the fuse holder located next to the powerCON input. Remove the bad
fuse and replace with a new one, and screw the fuse holder back in.

TROUBLE SHOOTING

Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is "hot"; on some other
DMX devices pin 2 may be 'hot'). Also, check that all cables are connected to the right connectors; it does
matter which way the inputs and outputs are connected.

CLEANING

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out
periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust,
dew).

SPECIFICATIONS

Model:
Voltage:
LEDs:
UV Range:
Working Position:
Power Draw:
Power Linking:
Fuse:
Weight:
Dimensions:
DMX Channels:
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change
without any prior written notice.
Vizi CMY300
100V~240V/50~60Hz
1 x 300W LED
399-435nm
Any safe working position
410W
3 Fixtures Max. @ 120V
7 Fixtures Max. @ 230V
10A
50 lbs./ 23 Kgs.
14.9" (L) x 16.17" (W) x 24.36" (H)
378.6 x 410.9 x 618.8mm
3 DMX Modes: 24/26/38
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 38