Installation; Multiple Unit Power Linking; Fuse Replacement; Cleaning - ADJ PAR Z100 5K User Instructions

INSTALLATION

The unit should be mounted using a mounting clamp (not provided), affixing it to the mounting bracket that is
provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating.
Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight
of 10 times the unit's weight. Also, always use a safety cable that can hold 12 times the weight of the unit
when installing the fixture.
The equipment must be installed by a professional, and it must be installed in a place where it is out of the
reach of people's grasp.

MULTIPLE UNIT POWER LINKING

With this feature you can connect the fixtures to one another using the powerCON input and output
sockets. The quantity that can be connected is 15 fixtures maximum @ 120V and 25 fixtures maximum
@ 230V. After maximum fixtures is met you will need to use a new power outlet.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE PAR Z100 5K AS THE
POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!

FUSE REPLACEMENT

Unplug the unit from any power source it may be connected to. Once the power has be disconnected, use a
phillips head screw driver to unscrew the fuse holder located above the powerCON input. Remove the bad
fuse and replace with a new one, and screw the fuse holder back in.

CLEANING

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror should be
carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the
fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the unit back in.

TROUBLE SHOOTING

Trouble Shooting: Listed below are a few common problems that you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
A.D.J. Supply Europe B.V. – www.adj.eu – Par Z100 5K Instruction Manual Page 14