ADJ VIZI CMY300 User Instructions page 29

OPERATING INSTRUCTIONS (continued)
Focus Compensate - With this function, you can select the focus in regards to projected distance. This setting
is used in conjunction with the focus channel in your selected DMX mode. Example: If the unit is being used in
a short distance around 5 meters then "NEAR" should be selected.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Focus Compensate" is displayed, and press ENTER. The current
setting will be displayed.
3. Use the UP or DOWN buttons to scroll through the different settings.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Fan Speed - With this function, you can select your desired fan speed.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Fan Speed" is displayed, and press ENTER. The current setting will
be displayed.
3. Use the UP or DOWN buttons to toggle between the three settings.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
DISPLAY SETTINGS -
Display Invert - With this function, you can "flip" the display 180 degrees.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Display Invert" is displayed, and press ENTER. The current setting
will now be displayed.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". Selecting "Yes" will "flip" the display, "No"
will return the display to normal.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Backlight Intensity - With this function, you can adjust the intensity of the display backlight.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Backlight Intensity" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to adjust the intensity between 0-30. 0 is the lowest intensity, 30 the
brightest.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Temperature Unit - With this function, you can switch the temperature setting between Celsius or Fahrenheit.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Temperature Unit" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between °C or °F.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
FIXTURE TEST -
Fixture Test - With this function, you can run an Auto Test or a Manual Test.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Test" is highlighted, then press
ENTER.
2. Use the UP or DOWN buttons to switch between "Auto Test" or "Manual Test".
3. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 29