OFFSET MENU (continued)
Pan
- Adjustment of the pan home position.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Pan" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
TILT
- Adjustment of the tilt home position.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Tilt" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Cyan
- Setting adjustment for cyan color disc.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Cyan" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Magenta
- Setting adjustment for magenta color disc.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Magenta" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Yellow
- Setting adjustment for Yellow color disc.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Yellow" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Color
- Setting adjustment for color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Color" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Gobo1
- Setting adjustment for gobo wheel 1 (glass gobo wheel).
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Gobo1" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
R Gobo1
- Setting adjustment for the gobo rotation in gobo wheel 1 (glass gobo wheel).
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "R Gobo1" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 32