Gobos; Changing The Gobo (1St Wheel) - ADJ VIZI CMY300 User Instructions

GOBOS

GOBO WHEEL 1 – REPLACEABLE GOBOS
GOBO WHEEL 2 – STATIC-FIXED GOBOS

CHANGING THE GOBO (1ST WHEEL)

The glass gobo's are the only gobo's that are interchangable in this unit. Remember when changing these
gobo's that they are glass. Please do this process gently so you do not break the gobo.
Caution! Never open the unit when in use. Always disconnect the main power before attempting to change
the gobos.
Note: Gobo 4 has no retainer ring. The gobo is held in by high temperature silicon sealant.
Locating the Gobo wheel: After disconnecting the main power, position the head with the lens facing
forward. Look through lens of the unit. When looking through the front lens, position the head so that the gears
are on the right side. When the gears are on the right side, the shell that needs to be unscrewed is now facing
up.
1. To change a gobo, unscrew the 4 screws that secure the shell to the unit. The shell is attached to the unit
by a safety wire, gently lift the shell off of the unit.
2. When you remove the shell you will be able to access the gobo wheel. Turn the wheel with your hand until
you come across the gobo you would like to change.
3. You have to remove the individual gobo frames. Gently push the gobo frame (Not the wheel) away from the
gobo wheel, you do not have to the push the gobo frame too far. While you are pushing the gobo frame away
from the wheel, pull the gobo frame up and out.
4. Once the gobo frame has been removed, you will notice that high temperature silicon sealant is applied to
the retainer ring. Using a small flat head screw driver, very gently scrape away the silicon sealant to release
the retainer ring. After the retainer ring is removed, remove the gobo.
5. Change the gobo and replace the retainer ring. Reapply high temperature silicon sealant to the same areas
on the retainer ring.
6. Insert the gobo frame back into the unit, positioning it in same way as the other gobo frames.
7. Reassemble the unit.
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 36