Mounting - ADJ VIZI CMY300 User Instructions

MOUNTING

When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without
any deformation. When installing the unit must be secured with a secondary safety attachment, e.g. and
appropriate safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installation
material being used, and periodic safety inspection of all installation material and unit. If you lack these
qualifications, do not attempt the installation yourself.
These installation should be checked by a skilled person once a year.
The Vizi CMY300 is fully operational in three different mounting positions, hanging upside-down from a ceiling,
sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at least 12m (40ft) away from
any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety
measure to prevent accidental damage and/or injury in the event the clamp fails (see next page). Never use
the carrying handles for secondary attachment.
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 7