SPECIFICATIONS ..................................38 ROHS - A great Contribution to the Conservation of Environment ..................39 WEEE – Waste of Electrical and Electronic Equipment ......................39 NOTES ....................................40 A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 3...
INOZIONE INTRODUCTION Unpacking: Thank you for purchasing the Vizi CMY300 by ADJ Products, LLC. Every Vizi CMY300 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
C. The fixture has been exposed to rain or water. D. The fixture does not appear to operate normally or exhibits a marked change in performance. E. The fixture has fallen and/or subjected to extreme handling. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 5...
Page 6
INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DISORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 6...
These installation should be checked by a skilled person once a year. The Vizi CMY300 is fully operational in three different mounting positions, hanging upside-down from a ceiling, sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at least 12m (40ft) away from any flammable materials (decoration etc.).
Page 8
Screw one clamp each via a M12 screw and nut into the Omega holders. Insert the quick-lock fasteners of the Omega holder’s into the respective holes on the bottom of the Vizi CMY300. Tighten the quick-lock fasteners fully clockwise. Install the second Omega holder. Pull the safety-cable through the openings located on the base plate and over the trussing system or a safe fixation spot.
DMX SET UP Power Supply: The ADJ Vizi CMY300 contains an automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere.
Page 10
2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior.
In the case of the Vizi CMY300, when in 24 Channel you should set the starting DMX address of the first unit to 1, the second unit to 25 (24 + 1), the third unit to 49 (24 + 24 + 1), and so on. (See chart below for more details.)
6. DMX input/output: For DMX 512 operation, use 3/5 pin XLR plug cable to link the units together. 7. Fuse (T10A): Protect the unit from damage of over current. 8. Power Cable: To connect to the main power supply or next fixture. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 12...
3. Either “On” or “Off” will displayed. To activate Wireless DMX press the UP or DOWN so that “On” is highlighted and press ENTER. 4. Press the MENU button to exit and return to the main menu. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 27...
Page 28
3. Use the UP or DOWN buttons to scroll through the different dimmer curves. 4. Press ENTER to confirm your selection or press the MENU button to return to the main menu. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 28...
Page 29
2. Use the UP or DOWN buttons to switch between “Auto Test” or “Manual Test”. 3. Press ENTER to confirm your selection or press the MENU button to return to the main menu. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 29...
Page 30
3. Press the MENU button to return to the main menu. USB Upgrade File - This submenu is used for any future software updates. Check www.adj.com and this units webpage for any software updates. Download the software update to a flash stick and plug the flash stick into the Flash Drive slot located on the front of the unit.Contact ADJ customer service for help when updating...
2. After you have set the WiFly address, follow the DMX instructions on page 27 to select your desired DMX Channel mode and set your DMX address. 3. Apply power to the ADJ WiFly Transceiver. The fixture must be set up first before you apply power to WiFly Transceiver.
Page 32
ENTER. 2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU button for one second to exit. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 32...
Page 33
ENTER. 2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU button for one second to exit. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 33...
TEMPERATURE SILICONE SEALANT.GOBO 4 IS SECURED WITH A HIGH TEMPERATURE SILICONE SEALANT ONLY, NO RETAINER SPRING. NO METAL BEZELS ARE USED TO SECURE ANY OF THE FACTORY GOBOS. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 35...
6. Insert the gobo frame back into the unit, positioning it in same way as the other gobo frames. 7. Reassemble the unit. A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 36...
The maximum that can be connected is 3 fixtures @ 120V and 7 fixtures @ 230V. After the maximum connected fixtures you will need to use a new power outlet. NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE VIZI CMY300 AS THE POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY! FUSE REPLACEMENT Unplug the unit from any power source it may be connected to.
(Registration in Germany: DE41027552) That means that products of ADJ and AMERICAN AUDIO can be left in the collection points free of charge and they will be used in the recycling program. Products of ELATION Professional, which are used only by professionals, shall be handled by us.