ADJ VIZI CMY300 User Instructions page 33

OFFSET MENU (continued)
Gobo2
- Setting adjustment for gobo wheel 2.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Gobo2" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Prism1
- Setting adjustment for the 1st prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Prism1" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
R Prism1
- Setting adjustment for the prism 1 rotation.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "R Prism1" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Prism2
- Setting adjustment for the 2nd prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Prism2" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
R Prism2
- Setting adjustment for the prism 2 rotation.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "R Prism2" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Iris
- Setting adjustment for the iris.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Iris" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Frost
- Setting adjustment for the frost filter.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Frost" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
Focus
- Setting adjustment for the focus.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "Focus" is
displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the
MENU button for one second to exit.
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 33