ADJ VIZI CMY300 User Instructions page 28

OPERATING INSTRUCTIONS (continued)
WDMX Address - In this submenu you can set the wireless DMX address.
1. Access the main menu, and press the UP or DOWN buttons so that "DMX Functions" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "WDMX Address" is displayed, and press ENTER.
3. The current WiFly address will be displayed. Press the UP or DOWN to adjust the WiFly DMX address and
press ENTER to confirm. The WDMX address must match the WiFly DMX address your Wireless DMX
controller is set to.
4. Press the MENU button to exit and return to the main menu.
FIXTURE SETTINGS -
Pan Invert - With this function, you can reverse the Pan movement.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Pan Invert" is displayed, and press ENTER. The current setting will
now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO". Selecting "YES" will activate pan inverse,
"NO" will deactivate the function.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Tilt Invert - With this function, you can reverse the Tilt movement.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Tilt Invert" is displayed, and press ENTER. The current setting will
now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO". Selecting "YES" will activate tilt inverse,
"NO" will deactivate the function.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
P/T Feedback - With this function, you have the pan and tilts position feedback while out of step or not
feedback while out of step.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "P/T Feedback" is displayed, and press ENTER. The current setting
will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO". Selecting "YES" will activate feedback,
"NO" will deactivate the function.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Dimmer Mode - With this function, you can select your desired dimmer curve. See the chart on page 38 for
the different curves.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Settings" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Dimmer Mode" is displayed, and press ENTER. The current curve
setting will now be displayed.
3. Use the UP or DOWN buttons to scroll through the different dimmer curves.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 28