ADJ VIZI CMY300 User Instructions page 30

OPERATING INSTRUCTIONS (continued)
FIXTURE INFORMATION -
Fixture Use Time - With this function, you can check the fixture running time.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Fixture Use Time" is displayed, and press ENTER. The fixture
running time will now be displayed.
3. Press the MENU button to return to the main menu.
Temperature - With this function, you can check the fixture temperature.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Temperature" is displayed, and press ENTER. The current fixture
temperature will now be displayed.
3. Press the MENU button to return to the main menu.
USB Upgrade File - This submenu is used for any future software updates. Check www.adj.com and this units
webpage for any software updates. Download the software update to a flash stick and plug the flash stick into
the Flash Drive slot located on the front of the unit.Contact ADJ customer service for help when updating
software.
Firmware Version - With this function, you can check the current firmware version.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Firmware Version" is displayed, and press ENTER. The current
firmware version will now be displayed.
3. Press the MENU button to return to the main menu.
RESET FUNCTIONS -
Pan & Tilt - With this function, you can reset the pan & tilt motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Pan & Tilt" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
To reset the pan & tilt motors, select "Yes" and press ENTER.
Effect - With this function, you can reset the effect motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Effects" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset the effects motors, select "Yes" and
press ENTER.
All - With this function, you can reset all of the motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "All" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset all of the motors, select "Yes" and
press ENTER.
SPECIAL FUNCTIONS -
Factory Setting - Within this menu, you can reset the fixture to factory settings.
1. Access the main menu, and press the UP or DOWN buttons so that "Special Functions" is highlighted,
then press ENTER.
2. "Factory Setting" will now be displayed, and press ENTER.
3. To reset the fixture to factory settings, use the UP or DOWN buttons to "Yes" and press ENTER. If you do
not wish to reset to factory settings, highlight "No" and press ENTER.
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 30