ADJ  FLAT PAR TRI18X User Instructions
Hide thumbs Also See for ADJ FLAT PAR TRI18X:

Advertisement

Quick Links

User Instructions
9/11
Flat Par Tri18X
Unpacking:
Thank you for purchasing
can DJ
. Every Flat Par Tri18X has bee
®
been shipped in perfect operating condit
ping carton for damage that may have oc
carton appears to be damaged, carefully
damage and be sure all accessories nece
arrived intact. In the case damage has b
ing, please contact our toll free custome
instructions. Do not return this unit to you
ing customer support.
Introduction:
The American DJ
ing pursuit to create high quality intelligen
is a DMX intelligent, high powered LED p
used in a stand alone mode or connected
tion. This wash has five operating mode
mode, RGB mode, Static Color mode and
Customer Support:
American DJ prov
to provide set up help and to answer any
ter problems during your set up or initial
us on the web at www.American DJ.com
tions. Service Hours are Monday through
Pacific Standard Time.
Voice:
(323) 582-3322
Fax:
(323) 582-3108
E-mail:
support@American
Warning!
To prevent or reduce the risk
not expose this unit to rain or moisture.
Caution!
There are no user serviceable
attempt any repairs yourself, doing so will
ranty. In the unlikely event your unit may r
American DJ.
PLEASE recycle the shipping carton w
American DJ
- www.Americandj.com - Flat
©
®
Flat P
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADJ FLAT PAR TRI18X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ADJ ADJ FLAT PAR TRI18X

  • Page 1 Flat Par Tri18X Unpacking: Thank you for purchasing can DJ . Every Flat Par Tri18X has bee ® been shipped in perfect operating condit ping carton for damage that may have oc carton appears to be damaged, carefully damage and be sure all accessories nece arrived intact.
  • Page 2: General Instructions

    • Do not attempt to operate this unit, if it 7 Channel Mode. • This unit is intended for indoor use only • ADJ LED RC compatiable (Not Included) doors voids all warranties. • Power Cord Daisy Chain (See page 17) •...
  • Page 3 1, the DMX controller knows to send DATA assigned to address 1 (ADJ part number Z-DMX/T) will decrea to that unit, no matter where it is located in the DMX chain.
  • Page 4: Operating Modes

    Flat Par Tri18X Operating Instructions Flat Par Tri18X should be displayed. Use the UP or DO LED Display On/Off: sitivity. “SJ-1” is the lowest sensitivity, “ To set the LED display to turn off after 10 seconds, press the MODE but- ton until “don”...
  • Page 5: Dmx Mode

    See pages 13-16 for each modes’ DMX traits. When this function is activated you can 1. This function will allow you to control each individual fixture’s traits ADJ LED RC (Remote Control). Please se with a standard DMX 512 controller. RC controls and functions.
  • Page 6 30 feet away. To use the ADJ LED Follow the directions below to set your D RC you must first activate the fixtures infrared receiver, to activate the 1.
  • Page 7 Flat Par Tri18X 1 Channel - DMX Values & Functions Flat Par Tri18X 2 Channel - D Channel Value Channel Value Function 1 - 255 COLOR MACROS (See 1 Chann 1 - 7 BASTARD AMBER 1 - 255 DIMM 8 - 15 MEDIUM AMBER 16 - 23 PALE AMBER GOLD...
  • Page 8 Flat Par Tri18X 5 Channel - DMX Values & Functions Flat Par Tri18X 7 Channel - D Channel Value Function hannel alue 1 - 255 0% - 100% 1 - 255 GREEN 1 - 255 0% - 100% 1 - 255 BLUE 1 - 255 0% - 100%...
  • Page 9: Power Cord Daisy Chain

    Flat Par Tri18X Power Cord Daisy Chain Flat Par Tri18X Listed below are a few common problem With this feature you can connect the fixtures to one another with solutions. using the IEC input and output sockets. The quantity that can be connected is 10 fixtures maximum.
  • Page 10: Warranty

    Flat Par Tri18X Warranty Flat Par Tri18X Model: Flat Par Tri18X MANUFACTURER’S LIMITED WARRANTY American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American Voltage: 100V ~ 240V/50 Audio products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse).

Table of Contents