Control Panel And Connections - ADJ VIZI CMY300 User Instructions

CONTROL PANEL AND CONNECTIONS

Front view
1. WiFly Antenna
2.
Service Port: USB Slot is used to upgrade the unit firmware
3. LED:
POWER On
DMX On
4. Display: to show the various menus and the selected function.
5. Button:
MENU To enter into the menu or leave the menu
UP To move up in the menu
DOWN To move down in the menu
ENTER To perform the desired functions
6. DMX input/output: For DMX 512 operation, use 3/5 pin XLR plug cable to link the units together.
7. Fuse (T10A): Protect the unit from damage of over current.
8. Power Cable: To connect to the main power supply or next fixture.
Power On
DMX input present
A.D.J. Supply Europe B.V. – www.adj.eu – Vizi CMY300 Instruction Manual Page 12
Rear view