3.1 Monitoring Product Life
3.1.1 Items That You Can Monitor
3.1
Monitoring Product Life
This functionality is supported by the following SERVOPACKs.
• Σ-7S SERVOPACKs with Analog Voltage/Pulse Train References
• Σ-7S SERVOPACKs with MECHATROLINK-II Communications References
• Σ-7S SERVOPACKs with MECHATROLINK-III Communications References
• Σ-7W SERVOPACKs with MECHATROLINK-III Communications References
3.1.1
Items That You Can Monitor
• SERVOPACK Installation Environment
• Servomotor Installation Environment
• Built-in Fan Service Life Prediction
• Capacitor Service Life Prediction
• Inrush Current Limiting Circuit Service Life Prediction
• Dynamic Brake Circuit Service Life Prediction
3.1.2
Operating Procedure
Use the following procedure to display the installation environment and service life prediction
monitor dialog box.
• Select Life Monitor
Prediction Monitor from the menu bar of the Main Window of the SigmaWin+.
Information
A monitor value of 100% indicates that the SERVOPACK has not yet been used. The percent-
age decreases as the SERVOPACK is used and reaches 0% when it is time to replace the SER-
VOPACK.
3-2
Monitor Items
−
Installation Environment Monitor or Life Monitor
With the Panel Operator or Digital Operator, you can use Un025 to Un02A to monitor this
information.
−
Service Life