Product Confirmation - YASKAWA S-7 Series Manual

1 Product Confirmation

1 Product Confirmation
When you receive your -7-Series SERVOPACK, confirm the following items.
Did you receive the correct -7-
Series SERVOPACK?
Is the SERVOPACK damaged in
any way?
Are there any loose screws?
If you discover any problems with the above items, contact your Yaskawa rep-
resentative immediately.
 Nameplate
• An SGD7-B SERVOPACK has the specifica-
tions that were registered by the customer with the MechatroCloud service.
Confirm the registered specifications before you attempt to use the SERVO-
PACK.
If you just turn ON the power supply to the SERVOPACK, unexpected opera-
tion may occur, and machine damage or personal injury may occur.
SERVOPACK
model
BTO information
Order number
Serial number
E-16
Item
Figure1 SERVOPACK Nameplate
Confirmation Method
Check the model number on the nameplate on
the side of the SERVOPACK. Also, check all
accessories.
Check the entire external appearance of the
SERVOPACK for damage that might have
occurred during shipping.
Use a screwdriver to check for any loose
screws.
WARNING
Degree of
protection
Surrounding
air temperature