YASKAWA SERVOPACK Sigma 7S Series Supplementary Manual page 22

Parameter

n. 003 Allocate the signal to CN1-3.

n. 004 Allocate the signal to CN1-4.

n. 005 Allocate the signal to CN1-5.

n. 006 Allocate the signal to CN1-6.

n. 007 Allocate the signal to CN1-7.

n. 008 Allocate the signal to CN1-8.

n. 009 Allocate the signal to CN1-9.

n. 010 Allocate the signal to CN1-10.

n. 011 Allocate the signal to CN1-11.
Pn597

n. 012 Allocate the signal to CN1-12.

n. 013 Allocate the signal to CN1-13.

n. 014 Allocate the signal to CN1-14.

n.0
Set the signal to always enable drive (always disable forc-
(default set-
ing the motor to stop).
ting)

n.1 Enable drive when the input signal is ON (closed).

n.2 Enable drive when the input signal is OFF (open).
Set the signal to always prohibit drive (always force the

n.3
motor to stop).
1.2.2 Setting the FSTP (Forced Stop Input) Signal
Description
1.2 Forcing the Motor to Stop
When Classifi-
Enabled cation
After
Setup
restart
1
1-13