Setting - SWF Dual Function E Series User Manual

Setting

5.9.0
- This function is for general setting of the embroidery. You have seven menus → basic setting, EMB
parameter setting, M/C parameter setting, needle setting, frame offset setting, option setting, and the
others setting.
Select in the initial screen and you will see [Fig.5.9.0-1]
•Basic setting : For setting parameters such as scale up, scale down, and angle.
•EMB parameter setting : For setting parameters related to embroidery.
•M/C parameter setting : For setting parameters related to the machine.
•Needle setting : For setting or changing the needle bar.
•Frame offset setting : For setting offset point on the design.
•Option setting : For setting design method of sequin, cording etc.
•The others setting : For setting needle type and thread detection
5 5 - - 2 2 2 2
[Fig.5.9.0-1]