Festo CDVI-DN Series Electronic Manual page 80

3. Diagnosis
3.3 Diagnosis on the DeviceNet
3.3.1 Diagnosis via Software Configurator
3−10
The following bus diagnoses are available:
Diagnosis via DeviceNet Scanner
Diagnosis via Software Configurator
(e.g. RSNetWorx, see chapter 3.3.1)
1. Make sure that the node is online on the DeviceNet.
2. Double click on the icon of the valve terminal in the
Software Configurator (e.g. RSNetWorx).
3. Click on the rider Configuration Settings".
4. Double−click on the parameter line Status Byte".
The detailed information will be shown (see Fig. 3/2).
Festo P.BE−CDVI−DN−EN en 0404NH