Festo CDVI-DN Series Electronic Manual page 58

2. Commissioning
2−16
d) Parametrize slaves
1. Double−click a slave in the Scanlist" (Fig. 2/8).
A dialogue window now opens.
2. Only with traditional EDS: Define the I/O parameters of
the slave. Confirm with OK.
Fig. 2/9: Mask for defining the I/O parameters of the slave
Configuration example:
Communication type: Polled"
1 input byte for the diagnosis (diagnostic byte)
5 output bytes for the CDVI−DN and an output module in
the extension.
Note the overview in Tab. 2/1.
Festo P.BE−CDVI−DN−EN en 0404NH