Festo CDVI-DN Series Electronic Manual page 22

1. Installation
1
Setting the
station number
(8−element DIL
switch, switch
elements 1...6)
Fig. 1/4: Setting the station number (8−element DIL switch)
Set station number: 05
Tab. 1/3: Examples of set station numbers
1−10
Setting the station number (slave address)
You can set the field bus station number (binary coded) with
the 8−element DIL switch.
1
Please note
Station numbers may only be assigned once per field bus
line.
The following station numbers are permitted:
Protocol Address designation Permitted station
DeviceNet Station number
Set station number: 38
0 2
2 + 2 =
1 + 4 =
5
Recommendation:
Assign the station numbers in ascending order. Adapt the
station numbers to suit the machine structure of your system.
4
numbers
0; ...; 63
1 2 5
2 + 2 + 2 =
2 + 4 + 32 =
38
Festo P.BE−CDVI−DN−EN en 0404NH