Table of Contents
Advertisement
1. Installation
1.3.4 Pin assignment of the DeviceNet
1−16
Please note
You must check the pin assignmrnt of your scanner with
the relevant documentation.
Connection to the bus is made at Bus in". Use a 5−pin M12
socket from Festo for this purpose (type FBSD−GD−9−5POL).
The continuation of the field bus is made at Bus out". Use a
plug of type FBS−M12−5GS−PG9 for this purpose.
For the position of these connections see also Fig. 1/1.
The following table shows the correlation between core
colour, signal and pin assignment:
*)
Core colour
blank
red
black
white
blue
BUS OUT
*)
Typical for DeviceNet cables
Tab. 1/7:
Pin assignment of the DeviceNet
Signal
Shield
24 V DC bus
0 V bus
CAN_H
CAN_L
BUS IN
Festo P.BE−CDVI−DN−EN en 0404NH
PIN
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Advertisement
Table of Contents
