Festo CDVI-DN Series Electronic Manual page 64

2. Commissioning
2−22
Idle Action, Main Unit" parameter
With this parameter you can define for each output whether it
is to freeze the current status in idle mode or whether it is to
assume a certain output status (0/1).
Parameter value
0
1
Idle Action, Main Unit" parameter
With this parameter you can define for each output the
output value (0 or 1) which it is to assume in the idle mode.
Parameter value
0
1
The set parameter value will only be taken into account if the
relevant output is set to 0 in the Fault Action parameter.
Idle Action, Main Unit Extension" parameter
The same function as above with Main Unit", but for the
output module in the CP extension.
Idle Value, Main Unit Extension" parameter
The same function as above with Main Unit", but for the
output module in the CP extension.
Meaning
The output will be set to a certain output
status (0 or 1). The output status is defined
with the Idle Value, Main Unit" parameter.
The status of the output is frozen.
Meaning
Output is reset
Output is set
Festo P.BE−CDVI−DN−EN en 0404NH