Festo CDVI-DN Series Electronic Manual page 20

1. Installation
Extending
CDVI−DN with 4 / 8 valve
locations (+ extension blocks)
without CP extension
CDVI−DN with:
CP input module
CDVI−DN with:
CP..− valve terminal
or
CP output module
CDVI−DN with:
CP..− valve terminal /
CP output module
and
CP input module
Tab. 1/1: Setting the extension to the CP system
1−8
Setting: Extending the CP system 1
Further CP modules can be connected to the CDVI−DN.
Outputs Inputs
8 / 16 / 24 O 8 I (status byte)
8 / 16 / 24 O 8 I (status byte)
+ 16 I
8 / 16 / 24 O 8 I (status byte)
+ 16 O
8 / 16 / 24 O 8 I (status byte)
+ 16 O
+ 16 I
The CP system occupies a different number of inputs and
outputs or station numbers depending on the extension set.
Further information can be found in section 1.5.
Setting the DIL switches
Festo P.BE−CDVI−DN−EN en 0404NH