PerkinElmer Lambda 365 Installation Instructions Manual page 6

6. Gently press the 5-Pos Variable Pathlength Cell Holder to connect the communication port (male)
under the bottom of the 5-Pos Variable Pathlength Cell Holder to the port (female) in the sample
compartment.
Figure 9 Connecting the communication ports
7. Tighten the 5-Pos Variable Pathlength Cell Holder in the sample compartment with the screws
(The red circles indicates the location of the screws in the figure).
Figure 10 Tighten the 5-PosVariable Pathlength Cell Holder in the sample
compartment
8. Turn on the power switch of the instrument.
6
09931462A