PerkinElmer Lambda 365 Installation Instructions Manual page 10

5-pos variable pathlength cell holder

Hide thumbs Also See for Lambda 365:

3. The functions of the Multicell calibration are shown as follows.

Command

MultiCell Position

Multicell Move

Multicell Calibration

Stop

Save Result

Reset Multicell

4. Click on Reset Multicell

5. Select MultiCell Calibration

samples from the 5-Pos Variable Pathlength Cell Holder (Empty the multicell holder).

6. Select OK, and then the Multicell calibration will start. The current process of calibration will be

shown in the main window.

Function

Show saved steps about each cell position of the Multi-Cell.

Used for moving Multi-Cell position as clicking buttons

Used for moving Multi-Cell position using

entered step.

Used to perform the Multi-Cell calibration.

Used to stop the Multi-Cell calibration.

Used to save the calibrated result.

Used to move to '0' step of Multi-Cell position.

to format the Multi-Cell steps. Click OK.

, and then the following dialog box will appear. Remove all

09931462A

buttons by

Table of Contents