Instructions For Use - Otto Bock 17AD100 10 Instructions For Use Manual

INFORMATION
Do not make any further static or dynamic changes to the
17AD100=16* Nexgear Tango after automatic calibration of the 17B203
E-MAG Active.
If patient-specific adjustments to the 17AD100=16* ankle joint are
required, repeat the process steps for automatic calibration of the 17B203
according to the 647G1165 instructions for use.
Further information about the 17B203 E-MAG Active is found in the
647G1165 instructions for use.
5 Safety
5.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
5.2 Safety instructions
CAUTION
Excessive strain on load-bearing components
Injuries due to changes in or loss of functionality
► Only use the product for the defined area of application.
► If the product has been exposed to extreme strain (e.g. due to falling),
take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
CAUTION
Mechanical damage to the product
Injuries due to changes in or loss of functionality
► Use caution when working with the product.
► Check the product for proper function and readiness for use.
► In case of changes in or loss of functionality, discontinue use of the
product and have it checked by authorised, qualified personnel.
CAUTION
Excessive strain due to use on more than one patient
Risk of injury and loss of functionality as well as damage to the product
► Use the product on only one patient.
31