Drive Enclosure; External Views Of A Drive Enclosure; Figure 162 Front View Of A 2.5" Type Drive Enclosure; Figure 163 Front View Of A 3.5" Type Drive Enclosure - Fujitsu ETERNUS DX S5 Series Design Manual

6. Hardware Configurations

Drive Enclosure

Drive Enclosure
This section explains the main components in the drive enclosure.
The drive enclosure contains drives installed in the front, and I/O modules and power supply units in the rear.
There are three types of drive enclosures that correspond to available drive sizes (2.5", 3.5", and high-density
3.5").
Drive enclosures can be added during system operation. When an error occurs, replacement operations can be
performed while the system is running.

External Views of a Drive Enclosure

■
Front View of a Drive Enclosure
Figure 162 Front View of a 2.5" Type Drive Enclosure
1 2
3
1
Operation panel
An operation panel has a DE-ID display and LEDs.
2
2.5" drive
(Refer to "■ Drives" (page
3
Flange cover
Figure 163 Front View of a 3.5" Type Drive Enclosure
1 2
Slot#8
Slot#4
Slot#0
3
1
Operation panel
An operation panel has a DE-ID display and LEDs.
2
3.5" drive
(Refer to "■ Drives" (page
3
Flange cover
272).)
Slot#9 Slot#10
Slot#5 Slot#6
Slot#1 Slot#2
272).)
266
3
Slot#11
Slot#7
Slot#3
3
Design Guide