Fujitsu ETERNUS DX S5 Series Design Manual page 187

4. NAS Functions
File Sharing
■
Changing the Settings for Anonymous Access
The setting to allow anonymous access for the CIFS access can be changed.
The settings for anonymous access are enabled or disabled for the sessions that are established after the
change.
If anonymous access is used, CIFS access from the CIFS client is allowed without specifying the username and
password.
Anonymous access is useful for troubleshooting or for test environments but is not recommended for normal
operations.
Perform the following procedure to change the settings for anonymous access.
1
Execute the ETERNUS CLI "set nas-server" command by specifying "yes" or "no" for the "-cifs-restrict-
anonymous" parameter.
2
Execute the ETERNUS CLI "show nas-server" command and then check the displayed result for "CIFS restrict
anonymous".
Note
During the operation phase
For Windows with a setting that does not permit anonymous access, anonymous access to the
ETERNUS DX is not available.
187 Design Guide