Figure 128 Enclosure Connection Path (When Only One Controller Is Installed); Figure 129 Enclosure Connection Path (When Two Controllers Are Installed) - Fujitsu ETERNUS DX S5 Series Design Manual

6. Hardware Configurations
Configuration Schematics
●
ETERNUS DX100 S5/DX200 S5
Connect the controller enclosure to the drive enclosure as shown in the following figures.
Connection paths are not duplicated when only one controller is installed.
Figure 128
DI
DE #0A
DI (IN)
DE #0x
DI (OUT)
DE #02
DI (IN)
DI (OUT)
DE #01
DI (IN)
DI (OUT)
CE
DI (OUT):
DI (IN):
Figure 129
DI
DE #0 A
DI (IN)
DE #0x
DI (OUT)
DE #02
DI (IN)
DI (OUT)
DE #01
DI (IN)
DI (OUT)
CE
DI (OUT):
DI (IN):
Enclosure Connection Path (When Only One Controller Is Installed)
Drive interface (OUT) port
Drive interface (IN) port
Enclosure Connection Path (When Two Controllers Are Installed)
DI (IN)
DI (OUT)
DI (IN)
DI (OUT)
DI (IN)
DI
DI (OUT)
Drive interface (OUT) port
Drive interface (IN) port
238 Design Guide