Figure 182 Drive Installation Diagram For High-Density Drive Enclosures - Fujitsu ETERNUS DX S5 Series Design Manual

6. Hardware Configurations
Installation Conditions and Installation Rules
■
Drives for High-Density Drive Enclosures
The installation priority order for drives in high-density drive enclosures is shown below.
1
3.5" Nearline SAS disks for high-density drive enclosures (4TB/7.2krpm)
2
3.5" Nearline SAS disks for high-density drive enclosures (8TB/7.2krpm)
3
3.5" Nearline SAS disks for high-density drive enclosures (12TB/7.2krpm)
4
3.5" Nearline SAS disks for high-density drive enclosures (14TB/7.2krpm)
5
3.5" Nearline FIPS SAS self encrypting disks for high-density drive enclosures (4TB/7.2krpm)
6
3.5" Nearline FIPS SAS self encrypting disks for high-density drive enclosures (8TB/7.2krpm)
7
3.5" Nearline FIPS SAS self encrypting disks for high-density drive enclosures (12TB/7.2krpm)
Install drives in the slots of a high-density drive enclosure from Slot#0 to Slot#59 in ascending order according to
the installation order.
Figure 182 Drive Installation Diagram for High-Density Drive Enclosures
IOM/PSU/FEM
Front
IOM/PSU/FEM
Rear
292 Design Guide