Home Directories; Figure 92 Home Directories - Fujitsu ETERNUS DX S5 Series Design Manual

4. NAS Functions

Home Directories

■
Commands
Different capacity values are shown for the results of the "df" command (shows the usage status of disk drives in
UNIX/Linux) and the "du" command (shows the used capacity of disk drives for the directory).
• The "df" command shows the total capacity of used and reserved areas in the file system.
The "du" command shows the total capacity of the files that are actually used in a directory and all of the
•
subdirectories under it.
Note that the capacity limits that are set with a quota cannot be checked with the "df" command. Use the
"quota" command in this case.
Home Directories
A dedicated shared folder (home directory) can be accessed when a CIFS connection is used. The home directory
can be accessed with Active Directory authentication or local user authentication. To use a home directory, use
ETERNUS Web GUI or ETERNUS CLI to create a shared folder ("homes") for the home directory by selecting "Home
Directory". The state of the home directory can be checked from ETERNUS CLI.
Figure 92 Home Directories
CIFS access
\\IP_address_of_the_NIC-CA\User1
or
\\IP_address_of_the_NIC-CA\homes
User (User1)
●
Access Method
\\IP_address_of_the_NAS_interface\Username
Or
\\IP_address_of_the_NAS_interface\homes
share1
homes/ homes/
User1 User2
NAS user volume
ETERNUS DX
189
share2
Design Guide