Fujitsu ETERNUS DX S5 Series Design Manual page 17

Preface
Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS DX60 S5/DX100 S5/DX200 S5,
ETERNUS DX500 S5/DX600 S5/DX900 S5 Hybrid Storage Systems (hereinafter referred to as ETERNUS DX).
The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY,
and other servers) or non-Fujitsu servers.
This manual provides the system design information for the ETERNUS DX storage systems.
This manual is intended for use of the ETERNUS DX in regions other than Japan.
This manual applies to the latest controller firmware version.
Copyright 2019 FUJITSU LIMITED
Second Edition
December 2019
17 Design Guide