Figure 5-3 Setting Up The Local Upload/Download Environment - H3C SecPath V100-S Installation Manual

Installation Manual
H3C SecPath V100-S Security Gateway
pass the authentication, you can upload and download configuration files or
applications.
Note:
Upload: to transfer files from PCs running FTP client to security gateway, namely the
put operation.
Download: to transfer files from security gateway to PCs running FTP client, namely the
get operation.
I. Setting up an upload/download environment
Setting up the local upload/download environment
10.110.10.13/24
PC
(FTP Client)

Figure 5-3 Setting up the local upload/download environment

Step 1: Connect the PC through the Ethernet port of SecPath V100-S.
Step 1: Configure the IP address of the Ethernet port of SecPath V100-S. Here
suppose it is 10.110.10.10.
Step 3: Configure the IP address of the PC. Here suppose it is 10.110.10.13.
Step 4: Copy the application, Boot ROM program or configuration files to a specific path.
Here suppose the path is C:\ version.
Caution:
The network port IP address of the PC must be in the same network segment with that
of the Ethernet port of the security gateway.
Setting up the remote upload/download environment
H3C SecPath V100-S (FTP Server )
LAN
5-9
Chapter 5 Software Maintenance
Ethernet interface
10.110.10.10/24