Table of Contents
Advertisement
7.2
Installing the machine
7.3
Making the stationary mains connection
7.3.1
Safety messages
Rewinder RW500
• The machine must be unpacked, assembled and installed in the instal-
lation location by specialized personnel.
• Separate installation and commissioning instructions are required for
this.
Only have the machine installed by MBO Service or by a customer ser-
vice technician authorized by MBO.
The electrical supply of the machine must be performed by a stationary
mains connection.
The stationary mains connection may:
• in Germany this may only be done by an installation company that is
registered in the installers' directory of the local power supply compa-
ny
• in Europe, this must generally be done by a electrically qualified per-
son.
This electrically qualified person must be familiar with the corre-
sponding standards, especially EN IEC 60364, as well as the techni-
cal connection requirements of the local power supply company.
• in the USA, this must generally be carried out by a licensed electri-
cian.
This licensed electrician must be familiar with the corresponding
standards, especially NFPA 70, as well as the technical connection
requirements of the local power supply company.
DANGER!
Hazardous voltage at the stationary mains connection.
Non-observance will result in serious injury or death.
•
The stationary mains connection of the machine may only be made
by an electrically qualified person.
•
Follow the local occupational safety regulations and electrotechnical
regulations.
•
400 V power supply. In case of a missing neutral conductor, electri-
cal components, e.g. frequency inverters, can be destroyed.
•
Due to the leakage currents of the controlled drives (frequency
inverters), an equipotential bonding conductor must be connected.
Installation, commissioning
Installing the machine
89
Advertisement
Table of Contents
