Table of Contents
Advertisement
Installation, commissioning
Introduction
7.1.2
Safety messages
88
WARNING!
Hazardous voltage.
Non-observance could result in serious injury or death.
•
Only a electrically qualified person may perform work on the
machine's electrical system.
•
Follow the local occupational safety regulations and electrotechnical
regulations.
•
On the terminals of the main switch, there is hazardous voltage even
when the main switch is switched off (see wiring diagram).
•
There is hazardous residual voltage on the connection terminals of
the frequency inverter even when the main switch is switched off
(heed capacitor discharge time).
WARNING!
Use of unsuitable fork lifts.
Non-observance could result in serious injury or death.
•
When selecting a fork lift, observe the relevant data such as load-
bearing capacity, load center of gravity, width of fork lift carrier and
length of forks.
•
For details about the minimum requirements, please see the "Tech-
nical data" chapter.
WARNING!
Tipping machine parts while unloading and installing the machine.
Non-observance could result in serious injury or death.
•
Use a fork lift for transportation.
•
No people may linger in the unloading area.
WARNING!
Insufficient properties and condition of the underfloor.
Non-observance could result in serious injury or death.
Check the properties and condition and load rating of the subsurface in
the set-up location.
For necessary minimum requirements, please see the "Technical data"
chapter.
WARNING!
Trip hazards due to cables and hoses lying around.
Non-observance could result in serious injury or death.
Lay the machine connections (cables, hoses, pipes) so that there are
no tripping points.
Rewinder RW500
Advertisement
Table of Contents
