Table of Contents
Advertisement
Adjustment and operation
Adjustment
Setting value
(experiential values)
Setting the
web tension (1)
Setting the
reduction factor (2)
Minimum
reduction factor (3)
118
Proceed as follows to set the internal web tension.
Illustration 62: Setting the web tension
Web tension = approx. 15-20%
Reduction factor = approx. 20-25%
Here's how to set the internal web tension:
Press the input field (1).
A numeric input field appears.
Enter the value for the required web tension.
The internal web tension is set.
Here's how to set the reduction factor:
Press the input field (2).
A numeric input field appears.
Enter the value for the required reduction factor.
The reduction factor is set.
No function with Rewinder RW500
The web tension is set based on the paper weight.
•
Light papers = low web tension.
•
Heavy papers = greater web tension.
1
2
3
Rewinder RW500
Advertisement
Table of Contents
