Pneumatic Dancer, Set Position - MBO RW500 Operating Manual

8.2.7

Pneumatic dancer, set position

Prerequisites
Set the dancer to the
<Setup>
position
Set dancer to the
<Production>
position
Rewinder RW500
Proceed as follows to set the position of the pneumatic dancer.
These prerequisites must be fulfilled:
• The <Setup> operating mode is switched on.
• The paper roll brake is switched off.
• The movable guards are closed.
Illustration 53: Pneumatic dancer, set position
Here's how to set the dancer to the <Setup> position:

Press the <Production / setup dancer
The illuminated button (1) is lit yellow.
The dancer moves upwards.

The dancer is in the <Setup> position.
Here's how to set the dancer to the <Production> position:

Press the <Production / setup dancer
The illuminated button (1) is lit green.
The dancer moves downwards.

The dancer is in the <Production> position.
The dancer is automatically moved to the <Production> position after
switching to the <Production> operating mode.
Adjustment and operation
1
> illuminated button (1).
position
> illuminated button (1).
position
Operation
107