Maintenance - MBO RW500 Operating Manual

Basic safety instructions
Residual risks
2.5.4

Maintenance

22
• Crushing and drawn-in hazard on the pressure shaft of the pressure
arm.
• Cutting hazard due to quickly-running, open web.
• Web break.
• Trip hazards due to cables and hoses lying around.
• Laser sensor class 2.
• Crushing hazard on the paper guidance.
• Crushing hazard from dancer system.
• Crushing hazard when changing paper rolls.
• Risk of burning on hot braking resistors.
Operational maintenance:
• Crushing and drawn-in hazards due to rotating machine parts.
• Heavy contamination.
• Improperly carried out maintenance.
• Unsuitable cleaning agents.
• Incorrect use of cleaning agents.
• Used cleaning cloths.
• Use of compressed air.
• Defective pneumatic lines.
• Trip hazards due to cables and hoses lying around.
• Incorrect maintenance intervals during multi-shift operation.
Maintenance:
• Hazardous voltage.
• Dismantling, bridging or bypassing safety and protective devices.
• Operation without protective devices.
• Crushing and drawn-in hazards due to rotating machine parts.
• Unsuitable tool.
• Improper maintenance.
• Use of non-approved safety components.
• Trip hazards due to cables and hoses lying around.
• Incorrect maintenance intervals during multi-shift operation.
Repair:
• Improper maintenance.
Rewinder RW500