Reasonable Foreseeable Misuse - MBO RW500 Operating Manual

Basic safety instructions

Reasonable foreseeable misuse

2.2 Reasonable foreseeable misuse
EMC behavior
Spare and wear parts
18
Reasonable foreseeable misuses are:
• The processing of materials other than easily tearing webs.
The specifications relative to format and grammage in the "Technical
data" chapter must be complied with.
• Processing paper grades and sizes outside the specifications in the
"Technical data" chapter.
• The operation of the machine by several people.
• Operation in an area subject to explosion.
• Operation with removed protective devices.
• Operation of the machine without training or briefing of the operating
personnel.
• Operation of the machine without the required personal protective
equipment.
• Exceeding of the technical values specified for normal operation.
• Individual changes and rebuilding.
• Maintenance and cleaning intervals not adhered to.
• Maintenance and repair work that is not performed correctly.
• Wearing parts not replaced.
• Unintended use.
• Climbing on panel covers or frames on the machine.
• Securing or suspending a person on the movable paper guide (e.g.
dancer arm, roll support arm).
The electromagnetic compatibility (EMC) of the machine can be impaired
by additions or changes of any kind.
Therefore, do not make any additions or changes to the machine without
consulting the manufacturer and procuring written permission.
The use of spare parts and wear parts from third-party manufacturers can
cause risks.
Use only original parts or parts approved by the manufacturer.
The manufacturer assumes no liability for damage from the use of spare
parts and wearing parts not approved by the manufacturer.
Rewinder RW500