Table of Contents
Advertisement
8.2.6
Adjusting the rewind direction of the paper roll
Prerequisites
Rewinder RW500
WARNING!
Drawn-in and crushing hazard.
With the relevant rewind direction, there is a hazardous entangle-
ment zone between the paper roll and floor.
Non-observance could result in serious injury or death.
•
Do not stand in the area of the paper roll when the machine is run-
ning.
•
Never crawl underneath the paper roll.
•
Never reach into the rotating paper roll while the machine is running.
•
Ensure that there are no objects located in this danger zone.
•
Mark the danger zone on the floor with black/yellow markings.
The rewind direction must be set in accordance with the print image of the
paper roll.
Proceed as follows to adjust the rewind direction of the paper roll.
These prerequisites must be fulfilled:
• The <Setup> operating mode is switched on.
• The rewind direction must be changed.
1 <Set rewind direction> button
Illustration 52: Set the rewind direction of the paper roll
The standard rewind direction is <counter clockwise>.
The LED in the button (1) is gray.
Here's how to set the rewind direction clockwise:
Press the <Set rewind direction> button (1).
The LED in the button (1) is green.
The paper roll rotates clockwise.
The rewind direction is set.
Adjustment and operation
Operation
1
105
Advertisement
Table of Contents
