Table of Contents
Advertisement
Feed in the web
Rewinder RW500
Here's how to feed in the web:
1)
Insert the web (5) underneath the infeed shaft (11).
2)
Guide web (5) over the guide shaft (10).
3)
Insert the web (5) between the moveable dancer shaft (12) and the
fixed guide shafts (9).
4)
Insert the web (5) underneath the guide shafts (12).
5)
Guide the web (5) through the in-feed shaft (7) and the nip roller (8).
6)
Insert the web (5) between the moveable dancer shaft (14) and the
fixed guide shafts (6).
7)
Guide web (5) over the guide shaft (4).
8)
Guide the web (5) underneath the guide shaft (3).
With standard rewind direction counter-clockwise
9)
Guide the web (5) underneath the pressure shaft (2) to the core shaft.
With rewind direction clockwise
10) Guide the web (5) over the pressure shaft (2) to the core shaft.
11) Fasten the end of the web with adhesive strips onto the empty sleeve.
12) Turn the core shaft by hand until there are approx. 2 - 3 windings over
the splice.
13) Switch the paper roll brake on.
The web has been fed in.
Adjustment and operation
Adjustment
115
Advertisement
Table of Contents
