7
Installation, commissioning
7.1
Introduction
7.1.1
Qualification of personnel
Rewinder RW500
To install/commission the machine, also observe:
• Qualification of personnel.
See chapter "7.1.1 Qualification of personnel".
• The safety messages.
See chapter "7.3.1 Safety messages".
• The safety instructions in the separate installation and commissioning
instructions.
See separate installation and commissioning instructions.
• The protective devices.
See chapter "4.4.8 Checklist for protective devices".
This table lists the necessary qualification of the personnel related to "Set
up and commissioning" of the machine.
Set-up
Electrical
connections
Stationary mains
connection
Commissioning
Table 24: Qualification of personnel; Set-up, commissioning
Legend: X permitted, - not permitted
Installation, commissioning
-
-
-
-
-
-
-
-
Introduction
X
X
X
X
87