General Safety Instructions; Transport, Interim Storage; Set-Up, Commissioning; Normal Operation - MBO RW500 Operating Manual

2.9

General safety instructions

2.9.1

Transport, interim storage

2.9.2

Set-up, commissioning

2.9.3

Normal operation

2.9.4

Setting up/equipping

Rewinder RW500
• Only specially-trained and authorized personnel may transport the ma-
chine.
• Keep the transport paths and the loading and unloading areas free of
personnel.
• Transport is only permitted to be carried out with approved lifting and
transport equipment.
• Only specially-trained and authorized personnel may set up and com-
mission the machine.
• Only instructed operating personnel may operate the machine.
• The machine may be operated only if all safety devices such as protec-
tive hoods and EMERGENCY STOP palm buttons, are present and fully
functional.
• At least once per shift, the machine must also be checked for externally-
visible damage. Changes, including to the operating behavior, must be
reported immediately.
• Machine parts may not be used as climbing aids. If it is necessary to
reach higher-up machine parts, a suitable work platform or other plat-
form must be used. This must fulfill the safety-technical requirements
such as height, stability, etc.
• Only specially-trained and authorized personnel may set up the ma-
chine.
• Inform operating personnel before beginning set-up.
• If the machine is switched off for set-up, it must be secured against un-
authorized or inadvertent switching on again.
Use a padlock to secure the main switch against switching on. If neces-
sary, attach a warning sign to the main switch.
• Machine parts may not be used as climbing aids. If it is necessary to
reach higher-up machine parts, a suitable work platform or other plat-
form must be used. This must fulfill the safety-technical requirements
such as height, stability, etc.
• If larger components or parts are replaced, corresponding lift equipment
must be used to transport the components. Only use suitable and tech-
nically-perfect lift equipment and load suspension devices with suffi-
cient carrying capacity. Secure components and parts so that they
present no hazard.
Do not linger or work under suspended loads.
Basic safety instructions
General safety instructions
25