Table of Contents
Advertisement
Adjustment and operation
Setting the contact pressure of the pressure arm
Adjusting the
contact pressure
120
Illustration 64: Setting the contact pressure of the pressure arm
Here's how to adjust the contact pressure of the pressure arm:
1)
Read the set pressure on the manometer (1).
2)
Pull out the adjustment element (2).
3)
Turn the adjustment element (2).
Direction of rotation clockwise
The pressure is reduced.
The contact pressure is reduced.
Direction of rotation counter-clockwise
The pressure is increased.
The contact pressure is increased.
4)
Set the desired contact pressure using the manometer (1).
5)
Push in the adjustment element (1).
The adjustment element is locked.
The contact pressure is set.
Set the contact pressure so that:
•
the pressure shaft is parallel on the paper roll.
•
no air pillows are created in the coil.
1
2
Rewinder RW500
Advertisement
Table of Contents
