Adjustment and operation
Operation
8.2.10
Move the in-feed shaft in inching mode
Prerequisites
110
Proceed as follows to move the in-feed shaft in inching mode.
These prerequisites must be fulfilled:
• The <Setup> operating mode is switched on.
• The web has been fed in.
• The movable guards are closed.
Illustration 56: Move in inching mode
Here's how to move the in-feed shaft in inching mode:
The <Inching> illuminated button (1) lights up in white.
Press and hold the <Inching> illuminated push button (1).
The illuminated button (1) is lit green.
The in-feed shaft rotates.
The in-feed shaft is moved in inching mode.
1
Rewinder RW500