Table of Contents
Advertisement
9.4.2
Check that all protective devices are present
Prerequisites
Checking protective
devices
9.4.3
Cleaning the machine
9.4.3.1
Safety messages
Rewinder RW500
WARNING!
Operation without protective devices.
Non-observance could result in serious injury or death.
The protective devices protect against danger spots.
•
Operation of the machine without protective devices is forbidden.
•
Make sure that all protective devices are re-attached after mainte-
nance or maintenance work.
Proceed as follows to check that the protective devices are present.
These prerequisites must be fulfilled:
• The machine is turned off now.
Here's how to check the protective devices:
Check that all protective devices are present and functional.
See chapter "4.4.8 Checklist for protective devices".
The protective devices are checked.
CAUTION!
Heavy contamination can impair the functioning of the machine.
Non-observance could result in property damage.
•
Clean the machine after each job (at least once per week).
•
The dust layer may never be more than 1 mm.
•
Especially clean dirt (paper dust, printing powder, etc.) from moving
parts.
•
Do not use any aggressive chemical detergents or cleaning agents.
If unsuitable detergents or cleaning agents are used, they can attack
lacquered surfaces.
•
Never clean the machine using compressed air. (bearing damage)
CAUTION!
Incorrect use of cleaning agents.
Non-observance could result in injury.
•
Be sure to follow the manufacturer's safety instructions.
•
Avoid any skin contact.
•
Wear suitable safety gloves.
•
Wear safety glasses.
Maintenance
Performing operational maintenance
131
Advertisement
Table of Contents
