Pairing Your Phone With Your Computer - Yealink T46S Skype for Business User Manual

User Guide for the T46S Skype for Business phone
To set up the Yealink BToE connector:
Right-click
Click Settings(P).

The Run automatically when starting Windows checkbox and Wired checkbox are
checked by default.
If you uncheck the Wired checkbox, you can click ResetIP to clear the current IP address,
and then enter the IP address of your phone manually.
Click Export Log(C), you can export the log file of Yealink BToE Connector, and then save

the file to your local system.
Click About(A), you can view the informaion of Yealink BToE Connector.

Click Exit(E), you can close the software.


Pairing Your Phone with Your Computer

There are two BToE Pairing modes on the phone. If BToE Pairing Mode is Auto, your phone
will pair with your computer directly without a pairing code. If BToE Pairing Mode is Manual,
You need to use a pairing code generated by your phone to manually pair your phone with
your computer.
To configure BToE feature via phone user interface:
Press Menu->Setting->Features->BToE.
1.
Press
2.
186
in the system tray, you can do the following:
or , or the Switch soft key to select Enabled from the BToE field.