Removing A Power Supply - Cisco UCS 5108 Installation Manual

Installing and Removing Components

Removing a Power Supply

Figure 40: Power Supply Bay and Connector Numbering (AC Version Shown)
Removing a Power Supply
Caution If you are using the Cisco UCS 5108 server chassis with one power supply (this is only supported in earlier
versions of the system software), removing the power supply will cause the servers and chassis to shut down.
If you are using more than two power supplies, and you remove one of them, the servers continue to operate
as long as the other power supplies are sufficient to meet the power requirements of the number of servers in
the chassis.
Cisco UCS 5108 Server Chassis Installation Guide
65