Inserting the Chassis into the Rack
Figure 23: Round Hole Adapter and Rails Installed in a Rack
Step 6
Use a tape measure and level to verify that both rack rails are horizontal and at the same height.
Step 7
Remove all power supplies, fan assemblies, server blades, and I/O modules to lighten the chassis. Even with
devices removed, the chassis weighs 90 lbs (40.83 kg).
Inserting the Chassis into the Rack
Procedure
Step 1
With the help of another person (or special lifting equipment), lift the chassis and place it on the mounting
rail as shown.
Cisco UCS 5108 Server Chassis Installation Guide
40
Installation