Required Equipment; Unpacking And Inspecting The Chassis - Cisco UCS 5108 Installation Manual

Server chassis

Hide thumbs Also See for UCS 5108:

Table of Contents

Installation

• Use the following torque values when installing the chassis:

Required Equipment

Before you begin the installation, ensure that you have the following items:

• Number 1 and number 2 Phillips-head screwdrivers with torque measuring capabilities

• Tape measure and level

• ESD wrist strap or other grounding device

• Antistatic mat or antistatic foam

Caution

When handling chassis components, wear an ESD strap and handle modules by the carrier edges only.

Tip

Keep the shipping container in case the chassis requires shipping in the future.

Note

The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any

items are missing, contact your customer service representative immediately.

Procedure

Step 1

Remove the chassis from its cardboard container. Save all packaging material.

Step 2

Compare the shipment to the equipment list provided by your customer service representative and verify that

you have received the following items:

• Any printed documentation

• Tool-less rack-mount kit (N20-CRMK2=)—mounting rails can be installed in a rack without the use of

• ESD wrist strap

• Cables with connectors (including the N20-BKVM=, which is the KVM/local I/O console dongle)

• Any optional items ordered

To prevent loss of input power, ensure that the total maximum loads on the circuits supplying power to

the chassis are within the current ratings for the wiring and breakers.

• 10-32 screws: 20 in-lb

tools. The optional round hole adapter kit (N20-CRMK2-RHA=) does require tools.

Cisco UCS 5108 Server Chassis Installation Guide

Required Equipment

Table of Contents